Vehicle is not selected at the moment
Please log in to manage your vehicles
SKU: IFRIDGESLIDE034
Check this part fits your vehicle
This part fits your
This part does not fit your
Estimated to be back in stock October 18, 2026
2 Years
On orders over $500 (certain exclusions apply)
There is nothing worse than crawling on your tailgate to see what’s in the fridge, or blindly moving your hand around until you can find what you are looking for. The new Ironman 4×4 Tilting Fridge Slide takes away the pain, with a simple and durable slide sized to your fridge.
Simple to use, the Tilting Fridge Slide has a single-lever lock-in and out feature keeping your fridge in place whilst in transit. The gas struts assist when lifting the slide tray reducing the load when the fridge is full.
Customers praised this tilting fridge slide as "solidly built" with "strong" gas struts and smooth operation at a "great" budget-friendly price. Installation is straightforward, though some noted missing mounting hardware or lack of instructions. One concern: the slide returns to horizontal when the fridge is nearly empty, requiring manual hold-down.
Don’t have anything bad to say about this works out very well. Fits my needs to a T.
A very solidly built product as always from Ironman4x4. Slides very smoothly and at a perfect angle for the height of my deck down to my tailgate. I literally just installed it so giving it 4 stars because there were no installation instructions. Not the most difficult to figure out using a simple diagram of the product components but if you've never even seen a slider before let alone installed one it can be tricky. I'm looking forward to many years of use from it and I'm sure it will hold up well, time will time though!
The product arrived quicker then expected, it is well built only issue I observed was not enough mounting bolts for the holes that were pre-drilled. All in all I’m satisfied and would purchase again
Install was super easy. The tilt support arms are very strong. Check contents, was missing mounting kit.
Came damaged. Contacted customer service. Never heard back. Quality is good. Nice product. Horrid customer service. First time ordering. Will not order from again.
Mike,
Thank you for the review. Sorry about the damaged fridge slide.
I didn't see any contacts in our system so sorry we did nto get back to you. IS that damage cosmetic or is that edge/corner affecting the performance of the slide?
JL
Strong, sturdy and very nice. Great way to lower your fridge.
The slider arrived on time and it looks really good quality. The price was great also. Got it installed on a custom box I made in the back of my 80. Ironman4x4 products in general have exceeded my expectations.
What a great product at a fraction of the price of similar tilting slides. I've been really happy with it so far. . . Solid engineering and build quality!
tilting fride slider
Favorite part, the gas struts, it helps to gently lower the fridge BUT the slide then wants to to return to its normal horizontal position when the fridge is almost empty. I would then have to hold it down in place w/ one hand, open the lid and grab what I need w/ my other hand. I wish there was a way to lock it into place under circumstances where the fridge is almost empty. I will just fab some sort of anchor to prevent it from going back to its horizontal position. I also like the fact that the slide's locking mechanism is in a spot where it won't snag on anything and getting bent. My old slide's locking lever would drop below the floor of the slide and get caught on the tailgate if I wasn't paying attention in the dark - I bent it. This slide also goes in and out smoothly and locks into place w/ minimal effort. On my last slide, I had to remove some plastic bumpers so that its slide would slide back and lock into its resting place.
All in all, I am very happy w/ the product. Solid build. Love the gas struts. The price is reasonable as well. It does take a bit more surface area because of the struts but w/ it sitting on top of my Decked - beats the heck out of grabbing a stool just to get food out of my fridge.
I would recommend this product to others.
Does a Dometic CFX5 35 fit on this product?
Thank you,
Jonya
This tilting slide is made for 30L to 50L fridges, but we can't confirm fit for the Dometic CFX5 35. The tray measures 29.5" x 16.9", so you can check that against your fridge's footprint.
Can you tell me the measurement from the bottom of the mount to the top of the tray the fridge actually sits on? I'm working with tight tolerances and need this to calculate fitment. Thank you!
Closed, the tilting slide measures 31.3" x 22.7" x 2.4" overall, and the tray it carries is 29.5" x 16.9" x 1.3". We don't break out a separate measurement from the base of the mount to the top of the tray.
Absolutely. Send your vehicle details, intended use (daily, towing, overlanding), and current mods, and we’ll recommend the correct configuration the first time. You can contact us here.
Yes—many products include instructions in the box and/or downloadable PDFs. Check the product page for “Vehicle Fitment & Installation/User Guide” tab. If you don’t see it, contact support here and we’ll send the correct install guide for your SKU.
Small items typically ship parcel; oversized items (bumpers, tents, long packages) ship freight, which is noted on the product page under the add to cart button. Transit time varies by location and carrier. We typically ship orders within 2 business days of purchase.
Warranty varies by product category. The product page lists the applicable warranty under the add to cart button. If you want confirmation before ordering, contact us or see our warranty policy here.
Returns are accepted under our returns policy within 30 days of purchase. See our return policy here for full details. Because many items are vehicle-specific, verify fitment before installing. For the quickest help, contact us with your order number and the item condition.