Will this bumper fit my Ford F-150 (2015-2020)?

Yes, the Raid Rear Bumper Kit is built for the 2015-2020 Ford F-150, and it is designed to leave the truck's factory electronics alone: it is fully compatible with all proximity sensors and cameras. [card] Sensors and cameras carry over This bumper is fully compatible with all proximity sensors and cameras, so the rear sensing and the camera view keep working after the swap. [/card] [card] More clearance at the rear The Raid rear increases approach and departure angles for maximum clearance over obstacles, and adds better vehicle protection to the back of the truck. [/card] [info] On the safety side: the bumper is ADR 69, 73 approved for Full Frontal and Offset Impact Occupant Protection and SRS Airbag tested and certified. [/info]

What's included with this bumper kit?

The Raid Rear Bumper Kit for the 2015-2020 Ford F-150 comes as a powder coated steel rear bumper with the lighting cutouts already there, ready for the lights you choose to run. [card] Cutouts for LED light bars and cube lights The lighting provisions are cut into the bumper. Our LED lights are available in spot or flood beam patterns, with clear or amber lens options for different weather. [/card] [card] Steel and finish The bumper is finished in black powder coat over pre-treated steel for rust resistance. [/card] [info] On wiring: a wiring harness is not included, so the bumper suits a wide variety of setups. We recommend a third-party harness matched to your build, and our lights connect easily using standard universal Deutsch connectors. [/info]

Will my back-up camera and factory sensors still work?

Yes, the Raid Rear Bumper Kit for the 2015-2020 Ford F-150 is fully compatible with all proximity sensors and cameras. That covers the rear sensing and the camera view on a 2015-2020 F-150, so backing up and parking behave the way they did before the bumper went on. [info] Not covered either way: blind spot monitoring sits outside the sensor claim on this bumper, so don't read it as covered. [/info]

Can I install this at home if I'm pretty handy?

Yes! The Raid Rear Bumper Kit for the 2015-2020 Ford F-150 goes on in place of the factory rear bumper, and the cutouts for LED light bars and cube lights are already there, so the mechanical side is straightforward for anyone handy. [card] What to have ready A socket set, a torque wrench, and somewhere to set the factory bumper down once it is off. Start the mounting bolts loosely, get the bumper sitting square, then torque everything down. [/card] [card] Bring a second set of hands This is a steel rear bumper, so have a second person help you take the weight and hold it in position while you start the mounting bolts. [/card] [card] Wiring for your lights A wiring harness is not included, so the bumper suits a wide variety of setups. We recommend a third-party harness matched to your build for any LED light bar or cube lights you run, and our lights connect easily using standard universal Deutsch connectors. [/card] Prefer to have it fitted by a certified dealer? Find one near you through our store locator .

Is this bumper crash tested and airbag safe?

Yes, the Raid Rear Bumper Kit for the 2015-2020 Ford F-150 is crash safety tested to ADR (Australian Design Regulation) 69, 73, covering Full Frontal and Offset Impact Occupant Protection, and it is SRS Airbag tested and certified. [card] ADR 69, 73 approved Approval covers Full Frontal and Offset Impact Occupant Protection. The bumper is tested to the highest standards in compliance with Australian Design Regulation. [/card] [card] SRS airbag tested and certified The F-150's airbag system is accounted for in that testing. The bumper is SRS Airbag tested and certified, not simply assumed compatible. [/card] [card] Integrated crumple zones The Raid design includes integrated crumple zones that transfer energy away from vehicle occupants. [/card]

Raid Rear Bumper Kit for Ford F-150 (2015-2020)

Raid Rear Bumper Kit for Ford F-150 (2015-2020)

SKU: RTB086K

Crash Safety Tested

Winch Compatible

Integrated Lights

Select Cube Lights 1st Pair

Select Cube Lights 2nd Pair

$599.00

$949.00

$599.00

Warranty

3 Years

Freight Shipping

This item ships at a flat rate of $199 (certain exclusions apply)

Ford F-150 Rear Bumper FAQ

Product Information

Make	Model	Year	Installation Guide

5 stars: 145 (71%)
4 stars: 27 (13%)
3 stars: 19 (9%)
2 stars: 10 (5%)
1 star: 3 (1%)

This product has no reviews of its own. The merchant grouped it with related products, so the reviews shown are from across that group.

I actually ordered this for

I actually ordered this for my 2010 Tundra. Knowing that it likely wouldn't fit, I purchased anyway because my truck got side swiped and it needed body work anyway. This bumper is awesome. It looks great, it's functional, and it's heavy duty. The body work I had done to fit the bumper was to make the body indentations in the box so it would fit. It turned out amazing. I also purchased and installed the Raid Bumper on the front as well. The truck looks pretty bad ass. I can't imagine there are a lot of trucks out there like it. I can post pictures if you'd like. I would also consider the Raid steps if they had the kick out in the rear. . . maybe something to consider. Overall, I'm very happy with the Rear AND Front Raid Bumpers from Ironman!

Excuse the dirty truck; it’s

Excuse the dirty truck; it’s a work truck. As for the build, it’s easy to assemble. You can fit Diode Dynamics lights with a bit of modification to their brackets. If you’re running 35x12. 50 tires, you might need to trim the lower panel guards. I left mine off for now until I trim them for the tires. When adjusting the bumper forward and backward, watch the light bar bracket—if not adjusted correctly, it will hit the winch tray and prevent the bumper from sliding back properly. The YouTube video is really helpful for the installation process. Now I just need to get the back bumper, unless they decide to sponsor the build for it, considering there are no reviews or other pictures besides theirs, lol.

Love this bumper. This was

Love this bumper. This was the look I was going for. I couldn’t be happier. Easy to install. I love the fact you can install a winch in it and it doesn’t show. Yes there is a 12000 lbs HF Badlands winch installed in there. I just moved the controls to the engine compartment. I would definitely recommend this to anyone looking for a quality bumper.

Looks great and the install

Looks great and the install was relatively easy. I recommend this upgrade!

Bought this bumper to replace

Bought this bumper to replace a stock one. Install was pretty easy, even by myself. I wish it came with wire extensions for the parking sensors and tow hookup because it sticks out further than stock and the wires are TIGHT!

Bumper fit was spot on

Bumper fit was spot on and the install videos were a huge help. The raid bumper is exactly what I was looking for.

Awesome product

Great looking bumper, perfect fit, really brings out the beauty of this truck

Amazing product. . . great quality! Easy installatio

Amazing product with quality. . .
Very well engineered and looks amazing!
Unfortunately i dont have another 4runner so i can buy another bumper

Great looking Bumper. Sketchy Templates

Nice Bumper Templates worthless so are Eyebrows if you dont use them. The Blind spot radar units work with this bumper so dont throw that feature away just to use the pointless metal Eyebrows. Cut straight across dont use templates. See pictures and Video. Any questions I have simple measure instructions to fit body back on and retain the Blind spot radar

Solid bumper looks awesome

Great looking bumper. I’ve gotten a lot of compliments on it. Solid build and easy to install. The brush guard was mine before but I able to put it back after I installed the bumper.

Love it

Absolutely love the way this bumper looks! It was also very easy to install.

Solid Bumper with great looks

Love the look at the Raid front bumper on my 2023 Tacoma. Install fairly easy after watching the video. Getting a winch in there with no real instructions not big problem either. All holes matched up fin. build seems very solid.
Going along great with my other Iron Man4x4 purchases; pet lounger, water tank, foam cell suspension. I placed two years ago, 270 Delta wing, and the rollout table. All our good quality haven’t got to use the them much since most of this has been placed in October. Just waiting on my rear Raid bumper now.
Ironman color scheme goes great with my Metallic Electric Lime Tacoma.

Best upgrade

The his bumper is amazing. I had a shop install it but they did an amazing job and it just what I wanted. Something rugged without being bulky. The lights are bright and I set them to flash I love the look. The fit is perfect I had been rear ended and all that but a small ripple is gone.

My Tundra not only looks amazing but also will now perform event better

Here my experience. l with this new bumper: My 4runner has a Demello bumper which is reinforced pretty well.
This time I decided to go with ironman since it's crash tested to Australian standards, has a winch tray, and recovery hooks that are connected directly to the chasis. Also the hybrid bumper allows easy access for fog light install after the fact and way easier to install than the demello in general. If you ever installed a bumper with a winch installed to the bumper (demello) it's a pain in the ass. Also while I like that the recovery hooks on the demello is flush with the bumper and reinforced, it's still not a direct load path to the chasis. The same thing goes with the winch on the demello, the load needs to go from the bumper then through the chasis since it doesn't have a winch tray. On the ironman, winch tray is connected directly to the chassis. But remember the wife thinks it's $100 for the bumper , so that's a killer deal. Also I think my Tundra looks better than the ironman's Tundra :sweat_smile:

I like the bumper a lot other than the slots for the tag lights I just ended up making block off plates and the instructions were not the best which made install a bit finicky.

Looks amazing. Install was straight

Looks amazing. Install was straight forward. Check your wiring situation as a switch inside is needed to complete the install. Great value.

Awesome bumper highly recommend!

Awesome bumper highly recommend!

Relatively easy to install on

Relatively easy to install on my 2021 Chevy Silverado Trail Boss. Didn’t come with the template to cut the front fender pieces so had to measure and pray. I also had to modify the top plate a bit to allow for easier access to the winch. Using a 12k Ironman winch, could hardly get to the to the clutch and very difficult to hand roll with the two small square holes provided. May want to consider changing the design a bit for usability. Shouldn’t be a big deal for a road princess but definitely an issue should you actually need to use the winch.

Love it

Love it

Highly recommend. Very simple to

Highly recommend. Very simple to install. Hardest part is cutting your old bumper. GREAT value for the quality of the product.

You have it listed as 2015-2020, but pictured is a 2021+. Can you confirm fitment? I'd like to install on a 2025

Brennen G.

This bumper is built for 2015 through 2020 Ford F-150 models, so we can't confirm it for your 2025.

Overall rating: 4.6349206 / 5 from 63 reviews.

AI Generated Review Summary

The Raid Rear Bumper Kit for Ford F-150 (2015-2020) offers enhanced safety with crash safety testing and SRS airbag compatibility. It provides better off-road performance and integrated lighting options. Customers find the installation straightforward and appreciate the bumper's appearance, though some had issues with the template.

Summary topics

Installation Ease (22%): A significant number of customers pointed out that installation of the product was straightforward and relatively easy.
Aesthetic Appeal (50%): Many customers loved the look of the bumper, describing it as great, amazing, and fantastic.

Review topics: ["fit","quality","looks","issues","finish","build","frame","work","bumper","install","fitment","sense","lights","rear","lines","truck","modifications","upgrade","video"].

Review highlights

"Looks great and the install was relatively easy." — Michael H.
"I highly recommend this bumper it's good quality it looks good thank you iron Man 4x4" — Robert S.
"Easy Install and looks great" — James R.

Reviews

Came damaged

"Bumper came in, installed it, and noticed the red tow hooks didn’t line up evenly on both sides. I emailed them and asked how to fix the issues. They said they could refund me the money, a whooping $200 for a $1,000 bumper with a factor defect. I asked about their “no bs warranty. ” I asked for them to swap it out with a new one. Their response was to send pictures with it damaged so it couldn’t be used again. Well, that wouldn’t be an issue if I still had the old factory bumper to put back on it, but it was damaged, so I can’t do that. And to wait a week or more with no rear bumper is unacceptable, so I say their warranty is BS in my book."

— Tim (1/5)

Awesome product

"Great looking bumper, perfect fit, really brings out the beauty of this truck"

— diapakha t. (5/5)

Great looking Bumper. Sketchy Templates

"Nice Bumper Templates worthless so are Eyebrows if you dont use them. The Blind spot radar units work with this bumper so dont throw that feature away just to use the pointless metal Eyebrows. Cut straight across dont use templates. See pictures and Video. Any questions I have simple measure instructions to fit body back on and retain the Blind spot radar"

— Marc G. (4/5)

The red paint on recovery

"The red paint on recovery points is a bit much, luckily it’s not powder coat and was easily sanded down for a repaint in black. Otherwise fitment is good and seems decent especially for the discounted price."

— Neil L. (4/5)

Install without metal eyebrow Keep BSM

"Continued. Please See previous review where pictures did not download"

— Marc G. (4/5)

Bought this bumper to replace

"Bought this bumper to replace a stock one. Install was pretty easy, even by myself. I wish it came with wire extensions for the parking sensors and tow hookup because it sticks out further than stock and the wires are TIGHT!"

— Denny K. (5/5)

Love it

"Absolutely love the way this bumper looks! It was also very easy to install."

— Josh (5/5)

Looks great and the install

"Looks great and the install was relatively easy. I recommend this upgrade!"

— Michael H. (5/5)

I actually ordered this for

"I actually ordered this for my 2010 Tundra. Knowing that it likely wouldn't fit, I purchased anyway because my truck got side swiped and it needed body work anyway. This bumper is awesome. It looks great, it's functional, and it's heavy duty. The body work I had done to fit the bumper was to make the body indentations in the box so it would fit. It turned out amazing. I also purchased and installed the Raid Bumper on the front as well. The truck looks pretty bad ass. I can't imagine there are a lot of trucks out there like it. I can post pictures if you'd like. I would also consider the Raid steps if they had the kick out in the rear. . . maybe something to consider. Overall, I'm very happy with the Rear AND Front Raid Bumpers from Ironman!"

— Jaison S. (5/5)

Finally got around to installing

"Finally got around to installing the Raid Rear Bumper. Installation was fairly easy after watching the video they provided. Most time consuming part was getting the plastic Toyota trim to fit properly. A lot of trial and error was involved but it looks great after that was done. Good quality bumper that is a bolt on fit with no welding. I highly recommend this bumper for your 4Runner for a clean and strong bumper."

— Tommie D. (5/5)

Active vehicle

My Build

Let's start by adding your vehicle

Select your Vehicle

Shopping Cart

Raid Rear Bumper Kit for Ford F-150 (2015-2020)