High quality product. Very nice
"High quality product. Very nice powder coat job. These things are built well and look great."
Shop with Confidence
Raid Heavy Duty Side Steps for Toyota 4Runner (2010-2024)
SKU: SS078
$899.00
$999.00
$899.00
Required Products
Warranty
3 Years
Freight Shipping
This item ships at a flat rate of $199 (certain exclusions apply)
There are required products for this item. .
Overall rating: 5.0 / 5 from 7 reviews.
AI Generated Review Summary
Summary topics
Review topics: [looks, instructions, step, slide, tab, directions].
Review highlights
Reviews
easy to install, built like
"easy to install, built like a brick outhouse, look great, cover seeing the frame but dont hang down in the way, unfortunately dont help in getting in or out, too much lift on truck"
Ordering with Ironman is great.
"Ordering with Ironman is great. Shipping is quick. The steps came very well packaged but there were two very small scratches that were not from delivery. Installation was not hard with instructions and videos on line from Ironman. I did the installation alone laying on my garage floor, another set of hands would have helped. I love the look and durability of the steps. They are very sturdy, sit tight to the body. I love the fact they are bolted to the frame and not the body. I didn't need true rock sliders but wanted steps that sat higher off the ground than the factory Predator steps. I am quite sure these steps will provide the protection I will need."
Super happy.
"Shipped day after ordering. Arrived in perfect condition. No directions or video but install was straightforward. Left and right install slightly different as drivers side slider goes between frame and gas tank skid plate. Look great. Angled on bottom for rock sliding and flat surface up top for stepping. No back end kickout for rocks but sliders angle outwards from front to back giving it a slight kickout. Murdered out green emblem with undercoat paint."
Side steps
"They r well made and heavy duty which is what i like."
Great sliders
"I'm really happy with these sliders. They look sharp and are nice and flat. My preschooler is able to use them to climb in. I do light-moderate off roading and I'm confident that these will provide ample protection."
Built solid. But could use some basic instructions.
"The steps seem to be well made. They were packaged well. Box showed up slightly damaged but the steps did not have any damage. Was slightly set back when I did not find any instructions in the box. Gave Ironman a call they apologized but did not have instructions yet. Was able to install in a couple hours despite the set back. All but two of the holes where pre taped. I recommend chasing the threads before installing as there is some factory paint in the holes. I believe they are M8-1. 25. You will need to remove the two bolts two the front of the fuel tank skid plate save them, you will need to reuse. You will also need to undo the brackets that hold the e brake cables as the steps use these holes, the brackets can be reinstalled once the steps are in place. There are two bolts with tabs welded on then included the one with the larger tab is used for the driver side step, and is placed in the crossmember. The second is used on the passenger side and go in a hole on the bottom side of the frame towards the front. This one I had to trim about 3/16 off the bolt end of the tab in order to get it in the hole. There are some clear plastic squares included to help hold these bolts in place during install. There is a small plastic tab that sticks down just behind the rear doors. You will need to trim the corner of of it to clear the steps. 3/4" up and 3/4" in connect the dots remove the corner with you choice of cutting device."
Q&A
- Will these fit a gx460 with kdss?
- No they will not.
- Do they come with instruction or video for non kdss? Thanks!
- There is an install video on our website!
- Do these fit on 4th gen 4runners
- These will not fit the 4th gen 4Runner
- Can I install these HD steps on a 21 gx460?
- They will not work.
- Will these fit a gx470 or gx460 non kdss
- These will only fit a non-kdss Toyota 4Runner 2010+.
Overall rating: 5.0 / 5 from 7 reviews.
AI Generated Review Summary
Summary topics
Review topics: [looks, instructions, step, slide, tab, directions].
Review highlights
Reviews
High quality product. Very nice
"High quality product. Very nice powder coat job. These things are built well and look great."
easy to install, built like
"easy to install, built like a brick outhouse, look great, cover seeing the frame but dont hang down in the way, unfortunately dont help in getting in or out, too much lift on truck"
Ordering with Ironman is great.
"Ordering with Ironman is great. Shipping is quick. The steps came very well packaged but there were two very small scratches that were not from delivery. Installation was not hard with instructions and videos on line from Ironman. I did the installation alone laying on my garage floor, another set of hands would have helped. I love the look and durability of the steps. They are very sturdy, sit tight to the body. I love the fact they are bolted to the frame and not the body. I didn't need true rock sliders but wanted steps that sat higher off the ground than the factory Predator steps. I am quite sure these steps will provide the protection I will need."
Super happy.
"Shipped day after ordering. Arrived in perfect condition. No directions or video but install was straightforward. Left and right install slightly different as drivers side slider goes between frame and gas tank skid plate. Look great. Angled on bottom for rock sliding and flat surface up top for stepping. No back end kickout for rocks but sliders angle outwards from front to back giving it a slight kickout. Murdered out green emblem with undercoat paint."
Side steps
"They r well made and heavy duty which is what i like."
Great sliders
"I'm really happy with these sliders. They look sharp and are nice and flat. My preschooler is able to use them to climb in. I do light-moderate off roading and I'm confident that these will provide ample protection."
Built solid. But could use some basic instructions.
"The steps seem to be well made. They were packaged well. Box showed up slightly damaged but the steps did not have any damage. Was slightly set back when I did not find any instructions in the box. Gave Ironman a call they apologized but did not have instructions yet. Was able to install in a couple hours despite the set back. All but two of the holes where pre taped. I recommend chasing the threads before installing as there is some factory paint in the holes. I believe they are M8-1. 25. You will need to remove the two bolts two the front of the fuel tank skid plate save them, you will need to reuse. You will also need to undo the brackets that hold the e brake cables as the steps use these holes, the brackets can be reinstalled once the steps are in place. There are two bolts with tabs welded on then included the one with the larger tab is used for the driver side step, and is placed in the crossmember. The second is used on the passenger side and go in a hole on the bottom side of the frame towards the front. This one I had to trim about 3/16 off the bolt end of the tab in order to get it in the hole. There are some clear plastic squares included to help hold these bolts in place during install. There is a small plastic tab that sticks down just behind the rear doors. You will need to trim the corner of of it to clear the steps. 3/4" up and 3/4" in connect the dots remove the corner with you choice of cutting device."
Q&A
- Will these fit a gx460 with kdss?
- No they will not.
- Do they come with instruction or video for non kdss? Thanks!
- There is an install video on our website!
- Do these fit on 4th gen 4runners
- These will not fit the 4th gen 4Runner
- Can I install these HD steps on a 21 gx460?
- They will not work.
- Will these fit a gx470 or gx460 non kdss
- These will only fit a non-kdss Toyota 4Runner 2010+.
Product Information
Overview
IRONMAN 4X4 heavy duty side steps are made from high quality steel, powder coated for longevity and chassis mounted for strength.
Designed to protect your vehicle from damage off-road and provide a convenient step into lifted 4WD's.
Features:
- Pickled, cold-rolled steel manufacturing for impurity free template during assembly
- Ultra-durable AKZO NOBEL Black Powder Coat and pre-treated steel for rust resistance
- 360° Robotic welding for consistently precise welds resulting in peak quality and unequaled strength
Overall rating: 5.0 / 5 from 7 reviews.
AI Generated Review Summary
Summary topics
Review topics: [looks, instructions, step, slide, tab, directions].
Review highlights
Reviews
High quality product. Very nice
"High quality product. Very nice powder coat job. These things are built well and look great."
easy to install, built like
"easy to install, built like a brick outhouse, look great, cover seeing the frame but dont hang down in the way, unfortunately dont help in getting in or out, too much lift on truck"
Ordering with Ironman is great.
"Ordering with Ironman is great. Shipping is quick. The steps came very well packaged but there were two very small scratches that were not from delivery. Installation was not hard with instructions and videos on line from Ironman. I did the installation alone laying on my garage floor, another set of hands would have helped. I love the look and durability of the steps. They are very sturdy, sit tight to the body. I love the fact they are bolted to the frame and not the body. I didn't need true rock sliders but wanted steps that sat higher off the ground than the factory Predator steps. I am quite sure these steps will provide the protection I will need."
Super happy.
"Shipped day after ordering. Arrived in perfect condition. No directions or video but install was straightforward. Left and right install slightly different as drivers side slider goes between frame and gas tank skid plate. Look great. Angled on bottom for rock sliding and flat surface up top for stepping. No back end kickout for rocks but sliders angle outwards from front to back giving it a slight kickout. Murdered out green emblem with undercoat paint."
Side steps
"They r well made and heavy duty which is what i like."
Great sliders
"I'm really happy with these sliders. They look sharp and are nice and flat. My preschooler is able to use them to climb in. I do light-moderate off roading and I'm confident that these will provide ample protection."
Built solid. But could use some basic instructions.
"The steps seem to be well made. They were packaged well. Box showed up slightly damaged but the steps did not have any damage. Was slightly set back when I did not find any instructions in the box. Gave Ironman a call they apologized but did not have instructions yet. Was able to install in a couple hours despite the set back. All but two of the holes where pre taped. I recommend chasing the threads before installing as there is some factory paint in the holes. I believe they are M8-1. 25. You will need to remove the two bolts two the front of the fuel tank skid plate save them, you will need to reuse. You will also need to undo the brackets that hold the e brake cables as the steps use these holes, the brackets can be reinstalled once the steps are in place. There are two bolts with tabs welded on then included the one with the larger tab is used for the driver side step, and is placed in the crossmember. The second is used on the passenger side and go in a hole on the bottom side of the frame towards the front. This one I had to trim about 3/16 off the bolt end of the tab in order to get it in the hole. There are some clear plastic squares included to help hold these bolts in place during install. There is a small plastic tab that sticks down just behind the rear doors. You will need to trim the corner of of it to clear the steps. 3/4" up and 3/4" in connect the dots remove the corner with you choice of cutting device."
Q&A
- Will these fit a gx460 with kdss?
- No they will not.
- Do they come with instruction or video for non kdss? Thanks!
- There is an install video on our website!
- Do these fit on 4th gen 4runners
- These will not fit the 4th gen 4Runner
- Can I install these HD steps on a 21 gx460?
- They will not work.
- Will these fit a gx470 or gx460 non kdss
- These will only fit a non-kdss Toyota 4Runner 2010+.
Raid Heavy Duty Side Steps for Toyota 4Runner (2010-2024) FAQs
Can I talk to a product specialist before ordering?
Absolutely. Send your vehicle details, intended use (daily, towing, overlanding), and current mods, and we’ll recommend the correct configuration the first time. You can contact us here.
Do you have installation instructions or a manual?
Yes—many products include instructions in the box and/or downloadable PDFs. Check the product page for “Vehicle Fitment & Installation/User Guide” tab. If you don’t see it, contact support here and we’ll send the correct install guide for your SKU.
How long does shipping take and do you ship freight?
Small items typically ship parcel; oversized items (bumpers, tents, long packages) ship freight, which is noted on the product page under the add to cart button. Transit time varies by location and carrier. We typically ship orders within 2 business days of purchase.
What’s your warranty coverage?
Warranty varies by product category. The product page lists the applicable warranty under the add to cart button. If you want confirmation before ordering, contact us or see our warranty policy here.
What is your return policy?
Returns are accepted under our returns policy within 30 days of purchase. See our return policy here for full details. Because many items are vehicle-specific, verify fitment before installing. For the quickest help, contact us with your order number and the item condition.