Will this bumper fit my Jeep Wrangler JK (2007-2017)?

The Raid Full Length front bumper fits the Jeep Wrangler JK, 2007-2017 . It replaces the factory front bumper with a two-part steel unit that increases approach and departure angles and adds ground clearance, but three conditions apply to the fit. [card] Vacuum Pump Relocation Kit Required (SEPARATE PURCHASE) For proper fitment the vacuum pump is relocated using a third-party relocation kit. It is a separate purchase rather than part of the bumper, so you can pick the one that suits your JK, and it is worth having on the bench before install day. [/card] [card] Only Works With A 9500 lbs Winch This bumper is only compatible with a 9500 lbs winch. Check what you already own, or what you plan to buy, before you order. [/card] A wiring harness is not included, so you can match one to your build. Our lights connect to a third-party harness easily using standard universal Deutsch connectors. A wiring harness is not included with the bumper.

Do the lights come with a wiring harness?

A wiring harness is not included with the Raid Full Length front bumper for the 2007-2017 Jeep Wrangler JK, so the light package suits a wide variety of setups. We recommend a third-party harness matched to your build, and our lights connect to it easily using standard universal Deutsch connectors. [card] 20" 105W Single Row Light-Bar The OSRAM chip LED light-bar delivers 8820 raw lumens into the road ahead. Hooded reflectors direct the beam more effectively and reduce the glare commonly found in light bars. [/card] [card] Two OSRAM Chip LED Cube Lights Up to 4800 lumens, with a choice of clear or amber lens and spot or flood beam pattern. [/card] [card] Lenses Built For Weather All the lights use a flat, UV-stable polycarbonate lens designed to reduce rain, snow and ice build-up. [/card]

What winch fits this bumper?

Only a 9500 lbs winch . The Raid Full Length front bumper for the 2007-2017 Jeep Wrangler JK uses the standard 10" x 4.5" winch mount footprint and is only compatible with a 9500 lbs winch, so size the winch to the bumper rather than the other way round. [card] Two-Stage Attachment To The Chassis The winch cradle connects directly to the chassis, giving the winch a recovery platform that does not load the bumper shell. One-piece alternatives pull from the shell and can twist or deform. [/card] [card] Then Check The Physical Fit Hold the winch's mounting bolt pattern against the 10" x 4.5" footprint, then look at drum length, motor housing size, and where the control box mounts and whether it clears. [/card] The bumper is designed for clutch handle access and line visibility, so confirm your clutch handle stays reachable and your fairlead lines up with the opening.

Can I recover or tow off this bumper?

Yes. The Raid Full Length front bumper for the 2007-2017 Jeep Wrangler JK includes bolt-on, frame-mounted recovery points rated to 3,500kg/7,700lbs , a concrete foundation for recovery or towing. [card] Anchored To The Frame The points anchor to the chassis rather than to the bumper shell, which is what makes them a solid foundation for a recovery or towing load. [/card] [card] Hi-Lift Jack Points Are Built In Jack points are integrated into the bumper, so you do not need separate high lift hooks to get a jack under the front end. [/card] [card] The Cradle Backs It Up The same two-stage attachment design that carries the winch connects the cradle directly to the chassis, so the whole front end is set up as a recovery platform rather than a bumper doing double duty. [/card] [info] Rating: 3,500kg/7,700lbs is the rating for the recovery points supplied with this bumper. [/info]

Can I install this at home?

Yes! At 101 lbs the Raid Full Length front bumper for the 2007-2017 Jeep Wrangler JK is well within reach of a handy owner at home. Bring in a second person for the lift, and plan the vacuum pump relocation into the same session. [card] Sort The Relocation Kit First For proper fitment the vacuum pump is relocated with a third-party kit, which is a separate purchase so you can match it to your JK. Have it in hand before you start and the two jobs run back to back. [/card] [card] Two People For The Shell 101 lbs of steel is much easier to hold square to the chassis with someone on the other end while you start the mounting hardware. [/card] [card] Wiring Is Its Own Step If you ordered the 20" light-bar and the cube lights, a wiring harness is not included so you can choose one that suits your setup, and our lights connect to it easily using standard universal Deutsch connectors. [/card] If you would rather have it fitted by a certified dealer, our store locator will point you at one nearby.

Raid Full Length Front Bumper Kit for Jeep Wrangler JK (2007-2017)

Raid Full Length Front Bumper Kit for Jeep Wrangler JK (2007-2017)

SKU: BBR077JKK

Crash Safety Tested

Winch Compatible

Integrated Lights

Select Light Bar

Select Cube Lights 1st Pair

$649.00

Requires a vacuum pump relocation kit, not included.

Warranty

3 Years

Freight Shipping

This item ships at a flat rate of $199 (certain exclusions apply)

Jeep Wrangler JK Front Bumper FAQ

Product Information

For proper fitment, you will need to purchase a vacuum pump relocation kit from a third-party. See Installation for more details.

The RAID 4x4 bumpers blend the Australian mindset of functionality with American design characteristics. As a result, the protective bumper provides you and your passengers maximum safety for daily driving with the essential trail-ready features of improved vehicle protection, increased approach angle, additional ground clearance, and winch carrying capability.

The Ironman 4x4 Raid bumper uses our two-stage attachment design, connecting the winch cradle directly to the chassis for the most robust possible recovery platform. Alternative one-piece bumpers pull from the bumper shell, causing twisting and potential deformation to the steel bumper and vehicle. In addition, the frame-mounted rated recovery points (3,500kg/7,700lbs) give you a concrete foundation for recovery or towing.

The Raid off-road steel bumper can come fully loaded with a 20", 105W single row OSRAM chip LED light-bar delivering projection of 8820 Raw lumens into the road ahead for confidence-boosting visibility in nighttime driving. The new hooded reflectors direct the light beam more effectively and reduce glare commonly found in light bars.

In addition to the powerful light-bar are two customizable OSRAM chip LED cube lights with up to 4800 lumens; choose between clear or amber, spot or flood. All lights feature a flat, UV-stable polycarbonate lens designed to reduce rain/snow/ice build-up.

Features:

Two-part front bumper design with a winch cradle mounted directly to the chassis for the strongest and safest possible winching platform for the harshest recovery situations
Bolt-on, frame-mounted recovery points (3,500kg/7,700lbs) included with the bumper
Integrated crumple zones transfer energy away from vehicle occupants
ADR 69, 73 approved (Full Frontal and Offset Impact Occupant Protection)
Tested to the highest standards in compliance with Australian Design Regulation, SRS Airbag tested and certified
Winch compatible with clutch handle access and line visibility
Only compatible with 9500lbs winch
Standard 10” x 4.5” winch mount footprint
Pickled, cold-rolled steel manufacturing for impurity free template during assembly
Ultra-durable AKZO NOBEL Black Powder Coat and pre-treated steel for rust resistance
360° Robotic welding for consistently precise welds resulting in peak quality and unequaled strength
Hi-lift Jack points built into the bumper so there’s no need for high lift hooks
Integrated light bar and dual cube lights
Increased approach and departure angles provide maximum clearance for obstacles
Compatible with factory parking sensors

Notes:

Weight: 101 lbs
Requires a vacuum pump relocation kit (not included) to install front bumper
Only works with 9500 lbs winch
Does NOT include wiring harness

Make	Model	Year	Installation Guide

Customers praised the bumper's quality and fit, noting it's "well built" with "great finish." Installation is straightforward, though some faced minor fitting challenges with frame flanges. Shoppers appreciate the winch encasement design. Areas for improvement include adding wire management tabs and sensor hole options.

Seems to be well built and great quality overall.
Installed it looks great. The fit and finish were great.
High quality, well made.

5 stars: 145 (70%)
4 stars: 28 (14%)
3 stars: 19 (9%)
2 stars: 11 (5%)
1 star: 3 (1%)

Some of the reviews shown are from related products the merchant grouped with this one.

I actually ordered this for

I actually ordered this for my 2010 Tundra. Knowing that it likely wouldn't fit, I purchased anyway because my truck got side swiped and it needed body work anyway. This bumper is awesome. It looks great, it's functional, and it's heavy duty. The body work I had done to fit the bumper was to make the body indentations in the box so it would fit. It turned out amazing. I also purchased and installed the Raid Bumper on the front as well. The truck looks pretty bad ass. I can't imagine there are a lot of trucks out there like it. I can post pictures if you'd like. I would also consider the Raid steps if they had the kick out in the rear. . . maybe something to consider. Overall, I'm very happy with the Rear AND Front Raid Bumpers from Ironman!

Excuse the dirty truck; it’s

Excuse the dirty truck; it’s a work truck. As for the build, it’s easy to assemble. You can fit Diode Dynamics lights with a bit of modification to their brackets. If you’re running 35x12. 50 tires, you might need to trim the lower panel guards. I left mine off for now until I trim them for the tires. When adjusting the bumper forward and backward, watch the light bar bracket—if not adjusted correctly, it will hit the winch tray and prevent the bumper from sliding back properly. The YouTube video is really helpful for the installation process. Now I just need to get the back bumper, unless they decide to sponsor the build for it, considering there are no reviews or other pictures besides theirs, lol.

Love this bumper. This was

Love this bumper. This was the look I was going for. I couldn’t be happier. Easy to install. I love the fact you can install a winch in it and it doesn’t show. Yes there is a 12000 lbs HF Badlands winch installed in there. I just moved the controls to the engine compartment. I would definitely recommend this to anyone looking for a quality bumper.

Looks great and the install

Looks great and the install was relatively easy. I recommend this upgrade!

Bought this bumper to replace

Bought this bumper to replace a stock one. Install was pretty easy, even by myself. I wish it came with wire extensions for the parking sensors and tow hookup because it sticks out further than stock and the wires are TIGHT!

Bumper fit was spot on

Bumper fit was spot on and the install videos were a huge help. The raid bumper is exactly what I was looking for.

Awesome product

Great looking bumper, perfect fit, really brings out the beauty of this truck

Amazing product. . . great quality! Easy installatio

Amazing product with quality. . .
Very well engineered and looks amazing!
Unfortunately i dont have another 4runner so i can buy another bumper

Install without metal eyebrow Keep BSM

Continued. Please See previous review where pictures did not download

Great looking Bumper. Sketchy Templates

Nice Bumper Templates worthless so are Eyebrows if you dont use them. The Blind spot radar units work with this bumper so dont throw that feature away just to use the pointless metal Eyebrows. Cut straight across dont use templates. See pictures and Video. Any questions I have simple measure instructions to fit body back on and retain the Blind spot radar

Solid bumper looks awesome

Great looking bumper. I’ve gotten a lot of compliments on it. Solid build and easy to install. The brush guard was mine before but I able to put it back after I installed the bumper.

Love it

Absolutely love the way this bumper looks! It was also very easy to install.

Solid Bumper with great looks

Love the look at the Raid front bumper on my 2023 Tacoma. Install fairly easy after watching the video. Getting a winch in there with no real instructions not big problem either. All holes matched up fin. build seems very solid.
Going along great with my other Iron Man4x4 purchases; pet lounger, water tank, foam cell suspension. I placed two years ago, 270 Delta wing, and the rollout table. All our good quality haven’t got to use the them much since most of this has been placed in October. Just waiting on my rear Raid bumper now.
Ironman color scheme goes great with my Metallic Electric Lime Tacoma.

I like the bumper a lot other than the slots for the tag lights I just ended up making block off plates and the instructions were not the best which made install a bit finicky.

Looks amazing. Install was straight

Looks amazing. Install was straight forward. Check your wiring situation as a switch inside is needed to complete the install. Great value.

Awesome bumper highly recommend!

Awesome bumper highly recommend!

Relatively easy to install on

Relatively easy to install on my 2021 Chevy Silverado Trail Boss. Didn’t come with the template to cut the front fender pieces so had to measure and pray. I also had to modify the top plate a bit to allow for easier access to the winch. Using a 12k Ironman winch, could hardly get to the to the clutch and very difficult to hand roll with the two small square holes provided. May want to consider changing the design a bit for usability. Shouldn’t be a big deal for a road princess but definitely an issue should you actually need to use the winch.

Love it

Love it

Highly recommend. Very simple to

Highly recommend. Very simple to install. Hardest part is cutting your old bumper. GREAT value for the quality of the product.

Finally got around to installing

Finally got around to installing the Raid Rear Bumper. Installation was fairly easy after watching the video they provided. Most time consuming part was getting the plastic Toyota trim to fit properly. A lot of trial and error was involved but it looks great after that was done. Good quality bumper that is a bolt on fit with no welding. I highly recommend this bumper for your 4Runner for a clean and strong bumper.

Overall rating: 0.0 / 5 from 0 reviews.

AI Generated Review Summary

This front bumper kit for Jeep Wrangler JK (2007-2017) offers robust protection and trail-ready features. It includes a two-stage attachment design for the winch, frame-mounted recovery points, and integrated crumple zones for safety. The kit features a powerful LED light-bar and customizable LED cube lights for enhanced visibility. However, it requires a third-party vacuum pump relocation kit for installation and is only compatible with a 9500 lbs winch.

Summary topics

Winch Compatibility (17%): Many customers raved about the winch, stating that it fits perfectly in the front grill.
Product Appearance (38%): Many customers loved the look of the product, describing it as great, amazing, and nice.
Product Quality (12%): It was reported by customers that the quality of the product is great and well-made.
Product Lighting (14%): Customers expressed satisfaction with the lights, stating that they were bright, well-made, and looked great.
Installation Ease (22%): Based on a significant number of customers, the installation of the product was described as easy and straightforward.

Review topics: ["shipping","looks","instructions","issues","fit","quality","packaging","price","finish","customer service","build","bumper","assembly","threads","design","install","protection","winch","lights","video","bolts","hardware","grill","bar","rear","brackets","welds","access","deal","nuts"].

Review highlights

"The powder coating looks great and the install was pretty straightforward." — Kyle H.
"Bumper looks great, winch is functional." — William W.
"Great bumper, great Aussie quality for Overlanding." — Christian R.

Reviews

Q&A

Is there a lower skid player to cover the Sway Bar Disconnect motor using the BBR077JKK bumper?: We do not offer one at this time.

Active vehicle

My Build

Let's start by adding your vehicle

Select your Vehicle

Shopping Cart

Raid Full Length Front Bumper Kit for Jeep Wrangler JK (2007-2017)