Home
Exterior Parts
Bumpers
Off-Road Front Bumpers
Premium Off Road Bumper for Ram 1500 (2013-2018)

Premium Off Road Bumper for Ram 1500 (2013-2018)

Premium Off Road Bumper for Ram 1500 (2013-2018)

Q: Will this bumper fit my Ram 1500 (2013-2018)?

Yes, if your truck is a 2013-2018 Ram 1500 . The Premium Off Road Bumper is built for that year range and arrives winch ready, with its install hardware and instructions in the box. [card] Two Parts, Not One The bumper and the winch cradle are separate pieces. The cradle bolts straight to the chassis, so the winch pulls from the chassis and not from the bumper. It is also why an assembly this heavy is manageable to fit, because you are not lining the whole thing up in one go. [/card] [card] What Changes On The Front End You get an improved approach angle, integrated fog lights, LED blinkers, and Hi-Lift jack points that are part of the bumper itself. [/card] [info] Before you order a winch: the mounting bolt pattern is the standard 10" x 4 1/2", so check your winch's foot spacing against that figure first. [/info]

Q: What winch will fit this bumper?

Any winch built to the standard 10" x 4 1/2" mounting bolt pattern. That is the spacing the Premium Off Road Bumper's winch tray is drilled for on the 2013-2018 Ram 1500, and it is the figure to measure your winch against before you buy. We don't specify a maximum winch capacity for this bumper, so beyond the bolt pattern the fit comes down to your winch's own dimensions. [card] Match The Bolt Pattern First Hold the hole spacing on the winch's feet against the 10" x 4 1/2" pattern in the supplied winch tray. If they do not line up, nothing else matters. [/card] [card] Then Measure The Winch Body Drum length, motor housing size, and control box placement decide whether the unit drops into the chassis-mounted cradle with room around it. Solenoid packs mount on the motor, over the drum, or remote on a lead, and a box you can relocate often makes a tight fit work. [/card] [card] The Winch Pulls From The Chassis The tray is a separate piece from the bumper and mounts directly to the chassis. Under a heavy pull the load is fed into the frame rather than through the bumper's front-end structure. [/card] Usability counts too: check you can reach the clutch handle with the winch bolted down, and that the fairlead sits square to the opening.

SKU: BBP075

Crash Safety Tested

Winch Compatible

Integrated Lights

Estimated Fitting Time:

$1,999.00

Does NOT fit Warlock models

Check this part fits your vehicle

This part fits your

This part does not fit your

Estimated to be back in stock February 24, 2027

Quantity

Required Products

Warranty

3 Years

Freight Shipping

This item ships at a flat rate of $199 (certain exclusions apply)

There are required products for this item. .

Ram 1500 Front Bumper FAQ

Yes, if your truck is a 2013-2018 Ram 1500. The Premium Off Road Bumper is built for that year range and arrives winch ready, with its install hardware and instructions in the box.

[card]

Two Parts, Not One

The bumper and the winch cradle are separate pieces. The cradle bolts straight to the chassis, so the winch pulls from the chassis and not from the bumper. It is also why an assembly this heavy is manageable to fit, because you are not lining the whole thing up in one go.

[/card]

[card]

What Changes On The Front End

You get an improved approach angle, integrated fog lights, LED blinkers, and Hi-Lift jack points that are part of the bumper itself.

[/card]

[info]

Before you order a winch: the mounting bolt pattern is the standard 10" x 4 1/2", so check your winch's foot spacing against that figure first.

[/info]

The Premium Off Road Bumper for the 2013-2018 Ram 1500 ships as a winch-ready bumper. A winch is a separate purchase, so you can match it to the recovery work you actually do, and four items come in the box:

[card]

Winch Ready Bumper

The bumper itself, with install hardware and instructions. The Hi-Lift jack points are built into it, so there is nothing extra to bolt on for those.

[/card]

[card]

Winch Tray

The separate cradle the winch sits in. It mounts directly to the chassis rather than to the bumper.

[/card]

[card]

Fog Lights

Integrated fog lights, 4" (100mm) in diameter, already sited in the bumper face.

[/card]

[card]

LED Running Lights And Turn Signals

LED running lights and turn signal lights come with the kit, and the LED blinkers are integrated into the bumper.

[/card]

The winch is the one piece you add. Because the tray and the mounting hardware are already here, what you are shopping for is the winch itself, not a separate mounting kit.

Any winch built to the standard 10" x 4 1/2" mounting bolt pattern. That is the spacing the Premium Off Road Bumper's winch tray is drilled for on the 2013-2018 Ram 1500, and it is the figure to measure your winch against before you buy. We don't specify a maximum winch capacity for this bumper, so beyond the bolt pattern the fit comes down to your winch's own dimensions.

[card]

Match The Bolt Pattern First

Hold the hole spacing on the winch's feet against the 10" x 4 1/2" pattern in the supplied winch tray. If they do not line up, nothing else matters.

[/card]

[card]

Then Measure The Winch Body

Drum length, motor housing size, and control box placement decide whether the unit drops into the chassis-mounted cradle with room around it. Solenoid packs mount on the motor, over the drum, or remote on a lead, and a box you can relocate often makes a tight fit work.

[/card]

[card]

The Winch Pulls From The Chassis

The tray is a separate piece from the bumper and mounts directly to the chassis. Under a heavy pull the load is fed into the frame rather than through the bumper's front-end structure.

[/card]

Usability counts too: check you can reach the clutch handle with the winch bolted down, and that the fairlead sits square to the opening.

The Premium Off Road Bumper for the 2013-2018 Ram 1500 has a published bumper weight of 227 lbs.

[card]

Add The Winch On Top

227 lbs is the figure for the bumper on its own. A winch is a separate purchase, so add its weight to that number when you are working out what is going on the front of the truck.

[/card]

[card]

Plan A Two-Person Lift

We recommend a second set of hands or a hoist when you lift the bumper shell into place, simply because of the sheer weight and size. The two-part design helps here too: the winch cradle goes onto the chassis on its own first, and the bumper follows.

[/card]

Yes! The Premium Off Road Bumper for the 2013-2018 Ram 1500 fits at home for anyone handy with tools. It is supplied with its own install hardware and instructions, so the fitting sequence is documented for you from the first bolt.

[card]

Fit It In Two Stages

The winch cradle bolts to the chassis first, then the bumper mounts over it. Working in that order keeps the heaviest single lift down and lets you check the cradle before the bumper covers it.

[/card]

[card]

Get A Second Set Of Hands On The Shell

We recommend a second person or a hoist when you lift the bumper shell onto its mounts, simply because of the sheer weight and size at 227 lbs. With the weight held steady, lining the mounts up and starting the bolts is straightforward.

[/card]

[card]

Give The Lighting Its Own Session

Fog lights plus LED running and turn signal lights all come with the kit, so there is wiring to run alongside the bolt-up. Set that aside as its own stage of the job and it goes smoothly.

[/card]

Prefer to have it fitted by a certified dealer? Our store locator will point you at one near you.

Product Information

Overview

Upgrade your Ram 1500 with a Premium Off Road bumper that adds functionality while still being crash safety tested. This two-part design is both very strong and easy to fit with a separate winch cradle means the winch pulls from the chassis not the bumper.

With the addition of integrated fog lights, our Ram 1500 bumper improves your night driving experience and provides great vehicle protection.

Features:

Crash tested and airbag compatible
Integrated Fog Lights and LED blinkers
2-part design, with winch cradle mounted directly to the chassis
Hi-Lift jack points
Improved approach angle

Includes:

Fog Lights
LED running lights and turn signal lights
Winch Tray
Winch Ready Bumper w/install hardware and instructions

Notes:

Bumper Weight: 227LBS
Standard 10" x 4 1/2" Winch mounting bolt pattern
Fog Light Diameter: 4" (100mm)

Specifications

Vehicle Fitment & Installation

Make	Model	Year	Installation Guide

User Guide

Videos

Required Products

Premium Off Road Bumper for Ram 1500 (2013-2018) FAQs

Can I talk to a product specialist before ordering?

Absolutely. Send your vehicle details, intended use (daily, towing, overlanding), and current mods, and we’ll recommend the correct configuration the first time. You can contact us here.

Do you have installation instructions or a manual?

Yes—many products include instructions in the box and/or downloadable PDFs. Check the product page for “Vehicle Fitment & Installation/User Guide” tab. If you don’t see it, contact support here and we’ll send the correct install guide for your SKU.

How long does shipping take and do you ship freight?

Small items typically ship parcel; oversized items (bumpers, tents, long packages) ship freight, which is noted on the product page under the add to cart button. Transit time varies by location and carrier. We typically ship orders within 2 business days of purchase.

What’s your warranty coverage?

Warranty varies by product category. The product page lists the applicable warranty under the add to cart button. If you want confirmation before ordering, contact us or see our warranty policy here.

What is your return policy?

Returns are accepted under our returns policy within 30 days of purchase. See our return policy here for full details. Because many items are vehicle-specific, verify fitment before installing. For the quickest help, contact us with your order number and the item condition.

Active vehicle

My Build

Let's start by adding your vehicle

Select your Vehicle

Shopping Cart

Premium Off Road Bumper for Ram 1500 (2013-2018)

Required Products

Warranty

Freight Shipping

There are required products for this item. .

Ram 1500 Front Bumper FAQ

Product Information

Overview

Specifications

Vehicle Fitment & Installation

User Guide

Videos

Required Products

Premium Off Road Bumper for Ram 1500 (2013-2018) FAQs

Can I talk to a product specialist before ordering?

Do you have installation instructions or a manual?

How long does shipping take and do you ship freight?

What’s your warranty coverage?

What is your return policy?

Be the first to know!

Active vehicle

My Build

Let's start by adding your vehicle

Select your Vehicle

Shopping Cart

Premium Off Road Bumper for Ram 1500 (2013-2018)

Required Products

Warranty

Freight Shipping

There are required products for this item. Click to view.

Ram 1500 Front Bumper FAQ

Will this bumper fit my Ram 1500 (2013-2018)?

What's included with this bumper kit, and does it come with a winch?

What winch will fit this bumper?

How much does this bumper weigh?

Can I install this at home if I'm pretty handy?

Overview

Features:

Includes:

Notes:

Specifications

Vehicle Fitment & Installation

User Guide

Videos

Can I talk to a product specialist before ordering?

Do you have installation instructions or a manual?

How long does shipping take and do you ship freight?

What’s your warranty coverage?

What is your return policy?

Be the first to know!

There are required products for this item. .