Will this rear bumper guard fit my Toyota RAV4 (2019-2025)?

Yes. The ATS Rear Bumper Guard with Hitch Receiver is made for the 2019-2025 Toyota RAV4 , and it is a bolt-on installation with no cutting or trimming required. All the mounting hardware for the install comes in the box. [card] Works With All Parking Sensors The guard is compatible with all parking sensors, so the factory rear sensing on your RAV4 keeps working once it is fitted. [/card] [card] Integrated 2-Inch Hitch Receiver The 2-inch hitch receiver is designed into the bar rather than added on top of it, so fitting the guard and adding a hitch are the same job. [/card] It covers the bottom edge of the rear bumper, the tail lights and other vulnerable components at the back of the vehicle, and an included skid plate offers additional protection underneath. That is the part doing the work day to day: protection from scratches and potential dents caused by fender benders and debris, on-road and off. We back it with a 3-year warranty.

What's included with this rear bumper guard?

The ATS Rear Bumper Guard for the 2019-2025 Toyota RAV4 ships as a complete kit, so there is no separate hardware pack to buy alongside it: [card] Rear Bumper Guard and Skid Plate The guard gives complete protection for the bottom edge of the rear bumper, the tail lights and other vulnerable components, against scratches and potential dents from fender benders and debris on and off-road. An included skid plate offers additional protection underneath. [/card] [card] All Mounting Hardware, Plus Black and Silver Plates All mounting hardware for installation is supplied, along with a pair of black and silver plates. [/card] [card] Integrated 2-Inch Hitch Receiver The bar is designed with an integrated 2-inch hitch receiver, which makes it a RAV4 tow hitch for trailers and other heavy loads. Refer to your owner's manual for the maximum tow rating of your vehicle before you load it up. [/card] We stand behind the guard with a 3-year warranty.

Will this work with my parking sensors?

Yes. The ATS Rear Bumper Guard for the 2019-2025 Toyota RAV4 is compatible with all parking sensors, so your factory rear sensing is unaffected by the install. [info] Also worth knowing: the guard is a bolt-on fit with no cutting or trimming required, so nothing on the factory bumper has to be cut away to make room for it. [/info]

Yes. The ATS Rear Bumper Guard for the 2019-2025 Toyota RAV4 is designed with an integrated 2-inch hitch receiver , which makes the rear bar a RAV4 tow hitch for trailers and other heavy loads. The receiver is part of the bar rather than a separate bolt-on accessory, so the guard and the hitch go on as one piece. [info] Before you hitch up: refer to the owner's manual for the maximum tow rating of your vehicle. [/info]

Can I install this at home?

Yes! The ATS Rear Bumper Guard for the 2019-2025 Toyota RAV4 is a bolt-on installation with no cutting or trimming required , and all the mounting hardware comes in the box, so a handy owner with basic hand tools has everything needed to fit it at home. You are fitting the guard, the skid plate and the black and silver plates in one go. The 2-inch hitch receiver is integrated into the bar, so there is no separate hitch install to book afterwards, and the guard is compatible with all parking sensors, so there is no sensor work in the job either. A second person makes holding the bar square while you start the bolts much easier, and it is worth leaving the fasteners finger tight until every mount is located. Would rather have it fitted by a certified dealer? Our store locator will find one near you.

ATS Rear Bumper Guard with Hitch Receiver for Toyota RAV4 (2019-2025)

ATS Rear Bumper Guard with Hitch Receiver for Toyota RAV4 (2019-2025)

SKU: RTB091

$799.00

Warranty

3 Years

Freight Shipping

This item ships at a flat rate of $199 (certain exclusions apply)

Toyota RAV4 Rear Bumper FAQ

Product Information

Make	Model	Year	Installation Guide

Rear bumper guard with hitch receiver that customers said "looks great" and is "easy to install." Well-built construction with good fit and appearance. However, multiple customers reported persistent bolt length issues - bolts are 1/2" too short for proper installation with included washers. Some also experienced misaligned holes requiring modification.

Easy to install and looks great.
It did fit my vehicle, looks good, and I saved 200 plus free shipping.
Seems well built.

5 stars: 1 (14%)
4 stars: 4 (57%)
3 stars: 1 (14%)
2 stars: 1 (14%)
1 star: 0 (0%)

Product looks good afternoon installed

Product looks good afternoon installed but don't expect the holes to line up. I had to oblong at least one hole on each side. Also the bolts should really be longer.

Do no t like the

Do no t like the SHOP app. that you are using. It makes it easier to accidently purchase the item before you are ready. I had more questions that did not get answered before I accidentally made the purchase. When you inquire about cancellation, it states that the order is immediately sent to the warehouse, and then you might not be able to cancel. So then if I was to return , I would incur a 10% restocking fee, plus shipping, which given the weight of the item, would not have been cheap. On another note, it did fit my vehicle, looks good, and I saved 200 plus free shipping. Just not pleased with the experience of purchase.

Would have given a higher

Would have given a higher rating except after several other posts you still have not fixed the problem with the bolts being 10 mm shorter than what is needed!!!!!

Easy to install and looks

Easy to install and looks great. Some of the bolts it came with were too short, but I had some extras off the old receiver. Would definitely be a problem for someone who did not have an old receiver though.

Pretty good, needs some tweaks.

Overall I'm happy with the results. The delivery was as expected and installation was pretty straightforward. The only problem I encountered was on the passenger side inner bolt could not be installed due to the hole not lining up even though all other hardware was loose. It is true that the rest of the bolts need to be longer if using the included washers, I used green locktite instead.

Bolts are too short

Bolts didn't work on my 2020 Rav4 XLE. Had to put it on without the lockwashers. I've seen this comment on another review, but thought "maybe just the other guy had an issue. " But nope. This is a known deficiency that they aren't doing anything to remedy. Hence my bad review. Please add longer bolts to the kit. Needs to be 3/8" at least, preferably 1/2" longer.

Rear hitch

Seems well built . Haven't put it to the test yet. Most mounting bolts are 1/2' too short

Is there an optional wiring harness available?

Brennen G.

Yes, We would normally sell that rear bumper with IWHL002 for each pair of lights.

Cheers - Ironman4x4

Active vehicle

My Build

Let's start by adding your vehicle

Select your Vehicle

Shopping Cart

ATS Rear Bumper Guard with Hitch Receiver for Toyota RAV4 (2019-2025)

Required Products

Warranty

Freight Shipping

There are required products for this item. .

Toyota RAV4 Rear Bumper FAQ

Product Information

Overview

Specifications

Vehicle Fitment & Installation

User Guide

Videos

Required Products