Worse install I have ever had.
"Where to start. We mounted both bars as per video and manual instructions. Once mounted we had no adjustment to get the main bar square because the slots were not log enough on the small bar. Also the smaller bar was hitting the exhaust guard under the car making motor the vibrate. The small bar was not fabricated correctly. We had to cut both side ears off the small bar and install a 1/8 flat bar shim where the two bolts mount the small bar to get it off the exhaust guard. We then dry fitted the small bar and tack welded the two slotted ears onto the small bar. Once we welded the ears back on the small bar and mounted everything back up we had the adjustment needed to square up the front bumper bar. The large skid plate was damaged on one corner I guess from shipping. Since we had to modify the small bar now the skid plate mounted holes want line up. We have spent a day and half already on this install and still not finished. Lights still have to be mounted and wired up but the main problem now is the large skid plate holes are not lining up. This should never happen with a item that is sold as just bolt on and go. I am extremely dissatisfied with the quality of the fabrication of the smaller bar and the damage of the large skid plate. Dewayne from South Carolina"