HOME > ATLAS ROOF RACKS > DUAL CAB SOLUTIONS > WAGON SOLUTIONS > ACCESSORIES
ATLAS ROOF RACKS – DUAL CAB FITMENTS
The Atlas dual cab roof racks range of platforms and crossbars are our ultimate load carrying solution, engineered to maximise the amount of space possible in storing your cargo. Our dual cab roof racks are designed with a functionality-first focus. This is reflected in our roof rack designs, which have been specifically moulded to minimise the inevitable noise that all roof racks make. That’s not to say that we disregard our aesthetics, as our roof racks have a sleek look that compliments your dual cab. With a wide range of dual cab roof rack types and many compatible vehicle models, the Atlas range has got you covered for your cabin, canopy and/or Slide-Away.
But where to start?
PLATFORM RACKS (aka. flat rack, flat trays)
The Ironman 4×4 Atlas Platform Racks are constructed of extruded aluminium beams, secured within an extruded aluminium perimeter. The racks are designed with the beams running perpendicular to the vehicle (side to side, rather than front to back). This setup makes for easier loading and securing of cargo, with far less chance of longer items dropping down and hitting your roof.
Platform racks are perfect for carrying a huge range of accessories and loads including gas bottles and jerry cans, swags and soft luggage, spare tyres, and chainsaws.
The Platform racks are available in three different lengths, and three different widths across a total of six variations to ensure an application that suits your needs.
PLATFORM RACK
(aka. flat rack, flat trays, etc.)
The Ironman 4×4 Atlas Platform Racks are constructed of extruded aluminium beams, secured within an extruded aluminium perimeter. The racks are designed with the beams running perpendicular to the vehicle (side to side, rather than front to back). This setup makes for easier loading and securing of cargo, with far less chance of longer items dropping down and hitting your roof.
Platform racks are perfect for carrying a huge range of accessories and loads including gas bottles and jerry cans, swags and soft luggage, spare tyres, and chainsaws.
The Platform racks are available in three different lengths, and three different widths across a total of six variations to ensure an application that suits your needs.
CAPACITY & WEIGHT
The full specs can be found in our appropriately named ‘Specs Table’ below. However, the crux of it is that these platforms are going to be stronger than any vehicle or fibreglass or ABS canopy roof load limit. For steel canopies, you can expect to hold at least 100kg dynamically.
A platform kit, including all mounting hardware, weighs between 24kg and 39kg. It is imperative that you subtract these total weights from the total roof load limit outlined by your vehicle’s manufacturer!
NO OFF-ROAD ASTERISKS: Unlike some manufacturers, the Ironman 4×4 Atlas has one rating and it applies whether you are on the black-top, corrugated dirt roads, sand, or rocky tracks.
SPECS TABLE
PLATFORM NO | SLATS | WIDTH | LENGTH | HEIGHT^ | WEIGHT* |
A | 7 | 1240mm | 1530mm | 50mm | 22kg |
B | 7 | 1380mm | 1530mm | 50mm | 23kg |
E | 10 | 1240mm | 2130mm | 50mm | 30kg |
K | 6 | 1240mm | 1390mm | 50mm | 21kg |
N | 10 | 1380mm | 2130mm | 50mm | 32kg |
S | 6 | 1485mm | 1390mm | 50mm | 25kg |
BLADE SYSTEM
Atlas platform racks are secured to most vehicles via a reinforced, stainless-steel blade, and can be affixed to an Ironman 4×4 canopy via a pedestal mount.
Stainless-steel is a pain in the a** to drill through. But these blades are the perfect location to attach a set of camp/work lights or mount an Anderson plug connection for your solar panel. So, being the forward thinkers that we are, we’ve pre-drilled some pilot holes making your life that much easier. You’re welcome!
LOUD NOISES
Roof racks WILL inarguably add some additional noise to your vehicle. If you have been told someone has a ‘silent’ one, they are confused; or it’s mounted to their canopy and they just can’t hear the additional noise it’s making in the canopy. All options within the Atlas system have been tested and designed to minimise this noise as much as possible. Taking a closer look you will see a small, unintrusive but very effective wind deflector under the front leading beam of our Atlas Platforms.
Additionally, the soft rubber inserts in the front and rear T-slots additionally are provided to reduce wind noise. Finally, the rack can be adjusted in its position forward and backward up to 20mm once installed to find the sweet spot!
SOLUTIONS TO SUIT YOUR 4WD
To suit Dual Cab vehicles, we have platform options to suit cabins, canopies and Slide-Away Electric Tonneau Covers.
Keep in mind you should never run a single platform across a canopy and cabin, due to the articulation and movement in transit and whilst 4wding.
Check out the below listing for the best platform sizes to suit each application:
CABIN
- Platform A
1240mm x 1530mm - Platform B
1380mm x 1530mm - Platform K
1240mm x 1390mm
CANOPY
- Platform A
1240mm x 1530mm - Platform B
1380mm x 1530mm - Platform K
1240mm x 1390mm - Platform S
(Custom Canopies)
1485mm x 1390mm
SLIDE-AWAY
- Platform S
1485mm x 1390mm
CROSSBARS (aka. roof bars, roof racks)
Ironman 4×4 crossbars are designed to maximise your roof load capabilities and assist with carrying a wide range of accessories and long equipment.
The Atlas Crossbars are constructed of extruded aluminium, designed with an integrated T-slot channel for easy fitment of a wide range of accessories and tie-down points, while each end also incorporated a tie-down point that will withstand the strongest ratchet straps.
Crossbars are attached with a leg that mounts to either a vehicle-specific foot-pack at a fixed point, or the mounting track. This ensures seamless and strong integration to your vehicle. The legs are also lockable for additional security.
Available in four lengths, (1250, 1375, 1500, and 1650mm), the crossbar range suits most popular dual-cab utes.
Crossbars are usually the preferred system for mounting rooftop tents. Not only are they lighter, but they are far easier to mount the tent to.
CROSSBARS
(aka. roof bars, roof racks)
Ironman 4×4 crossbars are designed to maximise your roof load capabilities and assist with carrying a wide range of accessories and long equipment.
The Atlas Crossbars are constructed of extruded aluminium, designed with an integrated T-slot channel for easy fitment of a wide range of accessories and tie-down points, while each end also incorporated a tie-down point that will withstand the strongest ratchet straps.
Crossbars are attached with a leg that mounts to either a vehicle-specific foot-pack or mounting track ensuring seamless and strong integration to your vehicle. The legs are also lockable for additional security.
Available in four lengths, (1250, 1375, 1500, and 1650mm), the crossbar range suits most popular dual-cab utes.
Crossbars are usually the preferred system for mounting rooftop tents. Not only are they lighter, but they are far easier to mount the tent to.
CAPACITY & WEIGHT
The Ironman 4×4 crossbars are rated to 50kg per crossbar, in a pair capable of 100kg. But do us all a favour, and check with your manufacturer what the roof load limit is for your vehicle – subtract the weight of the roof rack system and then only load your crossbars to the remaining capacity!
The Atlas crossbars paired with a fit-kit are unlikely to be more than about 10kg.
Basic math: 75kg dynamic roof load limit – subtract 10kg of hardware = 65kg off capacity to load.
NO OFF-ROAD ASTERISKS: Unlike some manufacturers, the Ironman 4×4 Atlas has one rating and it applies whether you are on the black-top, corrugated dirt roads, sand, or rocky tracks.
Most vehicle and accessory manufacturers only publish a ‘dynamic’ load rating. The Dynamic Load Rating is the total weight the roof / rack system can support while being driven. There is also a Static Load Rating, which is usually at least 2 – 3 times the dynamic load. So don’t be afraid that once you get to camp, you won’t be able to actually sleep in your rooftop tent!
SOLUTIONS TO SUIT YOUR 4WD
To suit a dual cab vehicle, we have four different length crossbars, sold in singles.
Keep in mind, that crossbars need to remain within the outer width of the vehicle’s side mirrors. Wider crossbars are generally suited to larger vehicles and vans.
- 1250mm
- 1375mm
- 1500mm
- 1650mm
Crossbars are available to suit cabins, canopies and Slide-Away Electric Tonneau Covers.
When fitting crossbars to Slide-Away, we recommend using 1500mm crossbars.
ACCESSORIES
The Atlas accessory range is designed to safely secure accessories and cargo to your roof in transit. Using the existing accessory slot on your crossbars or platform, the Atlas accessories provide an easy way to carry anything from a gas bottle and jerry can to timber or even a spare wheel.
Keep in mind that crossbars and platforms each have their own advantages when it comes to carrying gear. Crossbars are typically better for mounting rooftop tents and awnings or transporting longer items that can span between the two roof bars, like timber, swags, recovery tracks, etc. Whereas platforms are a great base for carrying a huge range of accessories and loads including gas bottles and jerry cans, swags and soft luggage, spare tyres, and chainsaws.
To see the full range of accessories, click the below link.
FIND YOUR ROOF RACKS
For our dual cab ute customers, we have the most extensive range of options, no matter the mounting option. Whether you have a Ford Ranger, a Toyota Hilux or one of the many other 4x4s, we can help set up your vehicle just the way you need it.
BOLT IT DOWN
Something this good looking, needs to be bolted, or it might just go walk-about! We’ve not spent the last few years with our heads in the sand, we understand the concerns over how roof rack solutions are attached to the vehicle and rest assured that in most cases we are able to utilise hard-mount fixing points that are already installed by the vehicle manufacturer. Where this is not an option, a customer track mount has been developed and secured to the vehicle for a robust and dependable mounting base for your platform rack.
Want an obligation-free, fitted quote from your local store? Find your vehicle below or use the individual parts at the bottom to add to your quote and we will contact you!
Below prices exclude fitting, freight and other consumables.
OTHER SIZES
Other crossbar and platform sizes are available to suit the above vehicles. To order these, please speak to your local store, click here for their details.
FIND YOUR ROOF RACKS
For our dual cab ute customers, we have the most extensive range of options, no matter the mounting option, to allow you to set your vehicle up just the way you need it.
BOLT IT DOWN
Something this good looking, needs to be bolted, or it might just go walk-about! We’ve not spent the last few years with our heads in the sand, we understand the concerns over how roof rack solutions are attached to the vehicle and rest assured that in most cases we are able to utilise hard-mount fixing points that are already installed by the vehicle manufacturer. Where this is not an option, a customer track mount has been developed and secured to the vehicle for a robust and dependable mounting base for your platform rack.
Want an obligation-free, fitted quote from your local store? Find your vehicle below or use the individual parts at the bottom to add to your quote and we will contact you!
Below prices exclude fitting, freight and other consumables.